Hioki LCR HiTester 3532-50

Wide band 2Hz to 5MHz LCR Tester for High Speed Testing on Production Lines

Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The 3532-50 is a general purpose LCR tester ideal for measuring electronic components such as capacitors and inductors.

This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately.

For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9638 without hardware flow control.

High speed measurement of 5ms
• High precision measurement of ±0.08% basic accuracy
• Interactive touch panel operation
• Zoom feature for easy viewing
• Print measurement values and comparator results (option)

Basic specifications (Accuracy guaranteed for 6 months)

Measurement parameters |Z|, |Y|, θ, Rp, Rs (ESR), G, X, B, Cp, Cs, Lp, Ls, D (tanδ), Q
Measurement range 100 mΩ to 100 MΩ, 10 ranges (All parameters defined by |Z|)
Extent of measurement impedance |Z|, R, X: 10.00 mΩ to 200.00 MΩ (depending on condition)
θ: -180.00° to +180.00°, C: 0.3200 pF to 370.00 mF, L: 16.000 nH to 750.00 kH,
D: 0.00001 to 9.99999, Q: 0.01 to 999.99, |Y|, G, B: 5.0000 nS to 99.999 S
(Note: All measurement ranges except for |Z| are for reference only)
Basic accuracy |Z| : ±0.08 % rdg. θ: ±0.05°
Measurement frequency 42 Hz to 5 MHz (0.1 Hz to 1 kHz steps)
Measurement signal level 10 mV to 5V rms (up to 1 MHz)
50 mV to 1V rms (1 MHz to 5 MHz), (1 mV rms steps)
10 μA to 100 mA rms (up to 1 MHz)
50 μA to 20 mA rms (1 MHz to 5 MHz), (10 μA rms steps)
Output impedance 50 Ω
Display LCD with backlight display, 99999 (3, 4, or 5 digits unit setting possible)
Measurement time FAST: 5 ms, NORMAL: 21 ms,
SLOW 1: 72 ms, SLOW 2: 140 ms (typical values for displaying |Z|)
DC bias Superimposed DC voltage, DC current to source signal (used with the optional DC bias unit and constant voltage or current source equipment)
Functions Comparator, External input/Output (EXT. I/O), GP-IB or RS-232C interface
(option) (Note: RS-232C interface required if used with the Printer 9442.)
Power supply Selectable 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 50 VA max.
Dimensions and mass 348mm (10.75in) W × 113mm (4.45in) H × 273mm (10.75in) D, 6.5kg (229.3oz)
Accessories Instruction manual × 1, Power cord × 1, Spare fuse × 1

Location

Ask about this product