THR1100A-S3.V2 3-ZONE MOST BASIC WALK-THRU METAL DETECTOR WITH TOP LED LIGHT


CE Mark, 3 MultiZone, Detects ECAC threat objects,10 security Level, IR Pass Sensor On‐Off
Selection, One way passenger counter.

ITEM NO.

FEATURES

THR1100A/s3

1

Technology

Microprocessor Based Digitally Controlled Pulse Induction with Very Low Frequency and No Harmful Effects on Human Health

2

Detection Zones

3

3

LED Zone Indicator Lights On Side Panels

No LEDs on Side Panels (Zone Display is on Control Unit)

4

Separate Zone Sensitivity Setting Feature

NO

5

Throughput Rate

(Detection Speed)

30 Person/Minute

6

Sensitivity level

10 Levels / 246 Sub Sensitivity Settings

7

Alarm Counter

YES/5 digit

8

Counter Incoming & Outgoing

ONE WAY

IN COUNTER

(5 digit)

9

Green/Red Bicolor Traffic Through LED Indication

YES

10

Tri-Color Metal Density Display Vu-Meter LED Bar Graph

YES

11

Auto Calibration

YES

12

Perform Self Test at Start Up and Continuously Check the System for Failures with Automatic Failure Display Function

YES

13

Environmental Magnetic Noise Level Display Feature

YES

14

Mechanical Lock for

Menu Access

NO

4 Digit PIN Code

15

LCD

4*20 Character

16

IP Protection Level

IP 20 (EN 60529)

17

IR Pass Sensor ON/OFF Feature for continuously Active or Sensor Activated Detection Mode Selections

Yes

18

Automatic Sensitivity Selection for Target Metallic Objects (Smart Detector)

No

19

SCADA

Yes (Simple Version / Enabling Remote Access to Settings only via a remote PC up to 100 m cable connection)

Software Optional

20

Battery ON/OFF feature enabling Operation Without Mains / 2 hrs Continuous Operation Against Electricity Cut Offs

No

21

Battery Operation LED indicator on Control Unit

No

22

Automatically Shut Down the WTMD to prevent battery from deep discharge

No

23

Relay Output

Yes

24

Real-Time Video Prosecution Unit

No

25

IRDA (Pilot) Remote Control Unit

No

26

Audio/Visual Alarm Range

2 meter                                                                                                                  

27

Automatic Frequency Selection Feature for Interference Free Operation of Multiple WTMDs

YES

28

Interference free operation

10cm distance constant metal /

150cm distance moving metallic object

29

Ambient Temperature

-20'C to 50'C

30

Weight

51Kg

Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5Standard and produced under ISO 9001: 2008 QMS (Chinese Metal Detectors comply their own National Norms Only)

• We do not use China Made Production Input. (Chinese Equipment Sockets/Connectors and Electronic Circuitry is rather low quality and in most cases Exporter/Manufacturer and the Model Number Serial No is not even Clear and probably without a proper User’s Manual)

• Certified Safe regarding Electromagnetic Field-EMC, IP Protection Levels, International Health and Safety Norms (Far East Equipment’ Certification could be Potato Stamp)

• No Set Up Change is Necessary regarding Winter/Summer Seasonal Adjustments and Resistant to Vibration & Impact (Far Eastequipment my require Adjustments as per Temperature Changes)

• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

• Give Alarm to all threat objects detected at different Alarm Zones. (Chinese equipment detects the Largest Threat Objects while others are not detected at the same time)

• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

• No Interferences between Zones and No False Alarms (Chinese equipment does not operate like this once detect and then not)
• Multi-Zone - 3 Detection Zones (Left/Middle/Right)v
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• 10 sensitivity levels, 246 adjustable sensitivity steps at each
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media (Certification with Chinese Equipment should be carefully checked)

• Green/Red bicolor traffic through LEDs easily allows sight from distance 30 Persons/Minute

• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

• Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen

• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.

• Five Digit Incoming Counter (Visible/Invisible)
• IR Pass Sensor ON/OFF Selection
• Four-digit changeable digital Pin Code
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

• Reloading the factory default settings by one-touch button

• Easy programming and monitoring with wide LCD display

• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish

• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

• OPTIONAL -Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

• No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

• IP 20 Protection Level (EN 60529)
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height

• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects
• Audio-Visual alarms are noticeable at a range of 2 meters

• Micro-Processor Settings does not change when there is an electricity cut-off

• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.v
• In conformity to CE and Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations.


• Weight: 51 kg

• Gross weight: 60 kg

• Operating voltage:70VAC – 270VAC / 50Hz - 60Hz

• Power: 10W Stand By- 20W (Alarm)

• Package Dimensions (W x H x L): Box 1: 560 x225 x 2270 mm Box 2: 225 x 235 x 790 mm

• Ambient Temperature: -20°C to +70°

 

Location

Ask about this product