Hioki Clamp on Sensor 9661

500A Voltage Output Sensor for Current Load Measurements

Hioki current sensors are best-in-class devices for use with power meters, PQAs and Memory HiCorders. The 9661 is a 500A AC voltage output clamp sensor for measuring large load current.

Note: Supports power quality analyzers, power meters and other data acquisition equipment with voltage input

For inverter equipment or commercial power lines
• Measure up to 550A AC continuously

Basic specifications (Accuracy guaranteed for 1 year)

Note: In addition to the Power Quality Analyzer, can also be used as a current sensor with HIOKI's power meter and voltage input recorders.

Rated primary current AC 500 A
Output voltage AC 500 mV f.s. (AC 1 mV/A)
Amplitude accuracy ±0.3 % rdg. ±0.01 % f.s. (45 - 66 Hz, f.s.= rated primary current)
Phase accuracy ±0.5 ° (at 45 Hz - 5 kHz)
Max. allowable input Continuous 550 A rms (at 45 - 66 Hz)
Frequency characteristics 40 Hz to 5 kHz: ± 1.0%
(deviation from accuracy)
Max. rated voltage to earth AC 600 V rms (insulated wire)
Core diameter φ 46 mm (1.81 inch)
Dimensions and mass 77 mm (3.03 in) W × 151 mm (5.94 in) H × 42 mm (1.65 in) D, 380 g (13.4 oz), cord length 3 m (9.84 ft)

Location

Ask about this product