Hioki Clamp on Probe 9018-50

Multi-range 500A Voltage Output Sensor for Capturing Waveforms with DMMS, Memory HiCorders and other data acquisition equipment.

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9018-50 is a multi-range 500A AC voltage output clamp sensor with superior phase characteristics for capturing waveforms with DMMs and Memory HiCorders.

For 50/60Hz commercial power lines; no external power supply required.

Choose from up to six general-purpose ranges
• Accurately record and analyze waveforms and harmonic signals

Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)

Rated current 10 A to 500 A AC, 6 ranges
Accuracy ±1.5 % rdg. ±0.1 % f.s. (45 to 66 Hz)
Frequency characteristics Add to amplitude accuracy : ± 1 % rdg.
Add to phase accuracy : ± 2.5 ° for frequencies from 40 Hz to 3 kHz
Output rate 0.2 V AC f.s. (f.s. = setting rage)
(Connect to a voltage input device providing a high input impedance of 1 MΩ)
Max. allowable input 150 A rms continuous (10/20/50 A ranges)
400 A rms continuous (100/200 A ranges)
650 A rms continuous (500 A range)
(For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating)
Max. rated voltage to earth 600 Vrms (50/60 Hz, CAT III)
Core diameter φ46 mm (1.81 in)
Dimensions and mass 78 mm (3.07 in) W × 188 mm (7.40 in) H × 35 mm (1.38 in) D, 420 g (14.8 oz), cord length: 3 m (9.84 ft)
Accessories Instruction manual ×1

Location

Ask about this product