SEW-Taiwan

Cable Tracers & Cable Testers

  • Filter
Created on: 19 February 2014

FEATURES Multi-purpose Cable Tester ● 165 CB is an ideal tool which can test the correct pin configuration    for different kinds of cables.● For testing:    -RJ45/RJ11 -USB    -COAX -BNC cable    -Multi-wire cable● Auto-scan and manual-check function● Buzzer sound warning for wire status● 2 LED module indicators on the master unit which can    do both of transmitter and receiver functions for   RJ45/RJ11 cable testing. Users don't need to use the receiving unit.● 165 CB provides a variety for checking cable continuity,  open status, short status and miss-wired.  ● Ground (shielded ) wire test.● LED indication for wire status.● Power source : 9V batteryAmplifier Probe ● The Amplifier Probe is designed to identify and trace  wires or cables within a group without damaging the insulation.   ● The flashlight function for easier cable tracing in the dark.● An LED indication for the signal strength. ● Volume control for increased sensitivity and adjustable   to suit work environment.● Recessed...

Category: Cable Tracers
Created on: 19 February 2014

FEATURES Filter Probe ● Works with any Tone Generator to identify wires.● Volume control for increasing sensitivity and    adjustable to suit work environment.● 2 operation modes: Filter on / Filter off.● The auto-off function (5 minutes) prevents battery    consumption.● Power supply is available in any 9V battery with a   life of approximately 50 hours.● A phone jack is designed for headset or handset.● Flashlight function.Tone Generator● Tone Generator is a great tool for locating and    identifying cable pairs or individual conductors.● 162 CB-G doesn't only provide the function of a    tone generator, but also serves as a continuity and   polarity tester.● A tone selector switch located inside the unit for    selection of the fast tone or the slow tone.● Two bi-colored LEDs for Line1 and Line 2 indication       of the polarities of the telephone lines.● The unit has alligator type terminals, a modular    cable of 4 conductors with a strong connector.● The tone and continuity functions are only...

Category: Cable Tracers
Created on: 19 February 2014

FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace    wires or cables within a group without damaging    the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable   to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and     identifying cable pairs or individual conductors.        ● 181 CB-G does not only serve as a tone generator,     but also serves as a continuity and polarity tester.        ● A tone selector switch located inside the unit for    selection of the fast tone or the slow tone.● The continuity function is only applied to Line 1.● Two bi-colored LEDs for Line1 and Line2 indication    of the polarities of the telephone lines.     ● The unit has alligator type terminals, a modular...

Category: Cable Tracers
Created on: 19 February 2014

FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace     wires or cables within a group without damaging     the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable    to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and    identifying cable pairs or individual conductors.        ● 180 CB-G doesn't only provide the function of a tone   generator, but also serves as a continuity and polarity    tester.● Test results are displayed by a bi-colored LED.     SPECIFICATIONS         Amplifier Probe     Frequency 1Hz~12kHz Receiver distance < 50cm Sensitivity control ˇ Probe tip Fixed Power source 9V(6F22) × 1 ...

Category: Cable Tracers
Created on: 19 February 2014

FEATURES Amplifier Probe ● The Amplifier Probe is designed to identify and trace    wires or cables within a group without damaging    the insulation.● Works with any Tone Generator to identify wires.● Volume control for increased sensitivity and adjustable   to suit work environment.● Recessed ON/OFF button prevents battery drain.● A phone jack is designed for headset or handset. Tone Generator ● Tone Generator is a great tool for locating and     identifying cable pairs or individual conductors.        ● 181 CB-G does not only serve as a tone generator,     but also serves as a continuity and polarity tester.        ● A tone selector switch located inside the unit for    selection of the fast tone or the slow tone.● The continuity function is only applied to Line 1.● Two bi-colored LEDs for Line1 and Line2 indication    of the polarities of the telephone lines.     ● The unit has alligator type terminals, a modular...

Created on: 19 February 2014

FEATURES Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset. (Amplifier probe)Phone Tester ● Continuity and resistance testing for voltage-free objects.● Check direct and alternating voltages.● Testing capacitors.● Testing diodes.● Power ON/OFF switch.● The indication of the LED lamp and the sound of the     buzzer can occur at the same time.● The LED indication for Power ON status.     SPECIFICATIONS         Amplifier Probe     Frequency 1Hz~12kHz Receiver distance < 50cm Sensitivity control ˇ Probe tip Fixed Power source 9V(6F22) × 1 Dimensions 230(L) × 56(W) × 27(D)mm Weight Approx. 125g (battery included) Tone Generator     Wave form Square Wave Frequency 1kHz±15% Over voltage protection 80V DC Single tone   ─ ...

Created on: 19 February 2014

FEATURES ● Designed for RJ45/RJ11 modular cables, 10/100   base-T cable and Token Ring cable.● The LAN cable tester can verify cable continuity,    open, short circuit and miss-wired. ● The remote receiving unit is available for installed   cables far away either on the wall plates or on the    patch panels.● Auto and manual scan functions.● Ground wire test.         ● Lock status function.● Buzzer sound warning for wire status.● Display : LED indication for wire status.     SPECIFICATIONS       Display LED Operating temperature 0°C ~ 40°C Dimensions Master unit 132(L) × 55(W) × 39(D)mm Remote receiving unit 74(L) × 30(W) × 25(D)mm Weight (battery included) Master unit : 148 g Remote receiving unit : 33g Power source 9V × 1 Safety standard EN 61326-1

Created on: 19 February 2014

FEATURES Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset.   (Amplifier probe) Digital Multimeter ● 4000 counts.● ACV, DCV.● Ohm, Diode, & Continuity testing.● Auto-range.● Data hold.● Low battery indication.● Select function.● Auto-off.     SPECIFICATIONS   AC Voltage     Range Resolution Accuracy 400mV 0.1mV ±(1.0%rdg+5dgt) 4V 1mV 40V 10mV 400V 100mV 750V 1V DC Voltage     Range Resolution Accuracy 400mV 0.1mV ±(0.5%rdg+3dgt) 4V 1mV 40V 10mV 400V 100mV 1000V 1V Resistance     Range Resolution Accuracy ...