- AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately)
- Wave peak value, Waveform distortion check
- Auto-power off to prevent the power from being left on
- Non-fuse type protects up to 600 V AC
- 1000 A AC Ø 46 mm
Description
Clamp On Hi-Tester (TRMS)
Even if voltage is mistakenly applied to the resistance range, the internal excessive voltage protection element (PTC thermister) protects the circuits for up to 600 V AC.
The HAND STRAP not only prevents the device from being dropped when working, but also effectively imparts strength when parting crowded wiring to clamp.
Specifications
AC Current range: | 30.00 to 1000 A AC, 3 ranges (±1 % rdg. ±5 dgt. at 50 or 60Hz), Effective value rectifier |
Wave peak value at AC Current: | 30.0 to 600 A peak, 3 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) |
AC Voltage range: | 300.0 or 600 V AC, 2 ranges (±1 % rdg. ±3 dgt. at 50 or 60Hz), Effective value rectifier |
Wave peak value at AC Voltage: | up to 300 or 600 V peak, 2 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz) |
Distortion check: | 1 to 5 Crest factor |
Resistance: | 1 k or 10 k-ohm range |
Temperature: | -50 to 150 °C (9462 TEMPERATURE PROBE required, sold separately) |
Frequency: | 100 or 1000Hz |
Mode: | Slow/Peak/C.F./RMS/Record mode/Auto-off/Conduction |
Analog Output: | None |
Frequency characteristics (at AC current / voltage): | 40 to 1000 Hz |
Display Section: | Digital / 3000 dgt. Bar graph / 35 seg. |
Sampling Rate: | 2 or 4 times/sec (Slow: 1 times/3 sec) |
Crest Factor (RMS): | 2.5 (1.7 at 600 A, 600 V range) |
Max. Circuit Voltage: | 600 V AC rms (insulated wire) |
Power Supply: | 6F22 (006P) × 1, Continuous use 45 hours |
Core jaw dia.: | Ø46 mm(1.81 in) |
Dimensions: | 62 mm(2.44 in)W × 218 mm(8.58 in)H × 39 mm(1.54 in)D |
Weight: | 400 g (14.1 oz) |
Accessories: | 9207-10 TEST LEAD (1), 9399 CARRYING CASE (1), Hand strap (1) |